建立科目二 II类考场评判表数据表

endian11

2019-11-27 ac9b1cf87096eab5baa5bbf8e82a8500c9bc0a0d

建立科目二 II类考场评判表数据表

 app/src/main/assets/criteria_I.json

@@ -197,21 +197,21 @@
  },
  {
    "item_id":29,
    "item_content": "直线转弯",
    "item_content": "直角转弯",
    "deducting_reason": "车轮轧道路边缘线",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":30,
    "item_content": "直线转弯",
    "item_content": "直角转弯",
    "deducting_reason": "转弯时不使用或错误使用转向灯，转完后不关闭转向灯",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":31,
    "item_content": "直线转弯",
    "item_content": "直角转弯",
    "deducting_reason": "中途停车时间超过2s",
    "score_deducting":5,
    "required_precision":""

 app/src/main/assets/criteria_II.json

New file
@@ -0,0 +1,472 @@
[
  {
    "item_id":1,
    "item_content": "通用要求",
    "deducting_reason": "不按规定使用安全带",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":2,
    "item_content": "通用要求",
    "deducting_reason": "不按考试员指令驾驶",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":3,
    "item_content": "通用要求",
    "deducting_reason": "启动发动机时档位未置于空挡(驻车档)",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":4,
    "item_content": "通用要求",
    "deducting_reason": "发动机启动后，不及时松开启动开关",
    "score_deducting":10,
    "required_precision":"时间大于2s，时间检测误差：0s~0.5s"
  },
  {
    "item_id":5,
    "item_content": "通用要求",
    "deducting_reason": "因操作不当造成发动机熄火一次",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":6,
    "item_content": "桩考",
    "deducting_reason": "不按规定路线、顺序行驶",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":7,
    "item_content": "桩考",
    "deducting_reason": "碰擦桩杆",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":8,
    "item_content": "桩考",
    "deducting_reason": "车身出线",
    "score_deducting":100,
    "required_precision":"甲乙库中间线误差±25mm,其他与标线中心偏移误差0mm~+50mm"
  },
  {
    "item_id":9,
    "item_content": "桩考",
    "deducting_reason": "倒库或移库不入",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":10,
    "item_content": "桩考",
    "deducting_reason": "项目完成时间超过480s(不含牵引车)",
    "score_deducting":100,
    "required_precision":""
  },

  {
    "item_id":11,
    "item_content": "桩考",
    "deducting_reason": "中途停车时间超过2s",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":12,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "车辆停止后,汽车前保险杠未定于桩杆线上，且前后超出50cm",
    "score_deducting":100,
    "required_precision":"距离检测误差:0mm~+50mn"
  },
  {
    "item_id":13,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "行驶中车轮轧道路边缘线",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":14,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "车辆停止后，车身距离路边缘线超出50cm",
    "score_deducting":100,
    "required_precision":""
  } ,
  {
    "item_id":15,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "车辆停止后,起步时间超过30s",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":16,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "起步时车辆后溜距离大于30cm",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":17,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "车辆停止后,汽车前保险杠未定于桩杆线上，且前后不超出50cm",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":18,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "车辆停止后，车身距离路边缘线超出30cm，未超出50cm",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":19,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "停车后未拉紧驻车制动器",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":20,
    "item_content": "坡道定点停车和起步",
    "deducting_reason": "起步时车辆后溜距离10cm~30cm",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":21,
    "item_content": "侧方停车",
    "deducting_reason": "车辆入库停止后，车身出线",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":22,
    "item_content": "侧方停车",
    "deducting_reason": "项目完成时间超过90s",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":23,
    "item_content": "侧方停车",
    "deducting_reason": "行驶中车轮触轧车道边线",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":24,
    "item_content": "侧方停车",
    "deducting_reason": "行驶中车身触碰库位边线",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":25,
    "item_content": "侧方停车",
    "deducting_reason": "出库时不使用或错误使用转向灯",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":26,
    "item_content": "侧方停车",
    "deducting_reason": "中途停车时间超过2s",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":27,
    "item_content": "通过单边桥",
    "deducting_reason": "车轮已驶过桥面起始位置,有一轮未上桥",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":28,
    "item_content": "通过单边桥",
    "deducting_reason": "已骑上桥面，在行驶中出现一个车轮掉下桥面",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":29,
    "item_content": "通过单边桥",
    "deducting_reason": "中途停车时间超过2s",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":30,
    "item_content": "通过单边桥",
    "deducting_reason": "行驶时档位未挂在二挡(含)以上",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":31,
    "item_content": "曲线行驶",
    "deducting_reason": "车轮轧道路边缘线",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":32,
    "item_content": "曲线行驶",
    "deducting_reason": "中途停车时间超过2s",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":33,
    "item_content": "曲线行驶",
    "deducting_reason": "行驶时档位未挂在二挡(含)以上",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":34,
    "item_content": "直角转弯",
    "deducting_reason": "车轮轧道路边缘线",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":35,
    "item_content": "直角转弯",
    "deducting_reason": "转弯时不使用或错误使用转向灯，转完后不关闭转向灯",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":36,
    "item_content": "直角转弯",
    "deducting_reason": "中途停车时间超过2s",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":37,
    "item_content": "通过限宽门",
    "deducting_reason": "不按规定路线、顺序行驶",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":38,
    "item_content": "通过限宽门",
    "deducting_reason": "碰擦一次限宽门标杆",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":39,
    "item_content": "通过限宽门",
    "deducting_reason": "车辆行驶速度低于10km/h",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":40,
    "item_content": "通过连续障碍",
    "deducting_reason": "不按规定路线、顺序行驶",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":41,
    "item_content": "通过连续障碍",
    "deducting_reason": "车轮轧道路边缘线",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":42,
    "item_content": "通过连续障碍",
    "deducting_reason": "中途停车时间超过2s",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":43,
    "item_content": "通过连续障碍",
    "deducting_reason": "轧、碰、擦一个圆饼",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":44,
    "item_content": "通过连续障碍",
    "deducting_reason": "行驶时档位未挂在二挡(含)以上",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":45,
    "item_content": "起伏路行驶",
    "deducting_reason": "车辆以大于12km/h的速度通过起伏路面",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":46,
    "item_content": "起伏路行驶",
    "deducting_reason": "中途停车时间超过2s",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":47,
    "item_content": "起伏路行驶",
    "deducting_reason": "通过起伏路面前2m时，车辆未减速到12km/h",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":48,
    "item_content": "窄路掉头",
    "deducting_reason": "三进二退未完成掉头",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":49,
    "item_content": "窄路掉头",
    "deducting_reason": "车轮轧道路边缘线",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":50,
    "item_content": "窄路掉头",
    "deducting_reason": "项目完成时间超过300s",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":51,
    "item_content": "模拟高速公路行驶",
    "deducting_reason": "行驶中占用两条车道、应急车道或大型车辆前后100m均无其他车辆仍不靠右侧车道行驶",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":52,
    "item_content": "模拟高速公路行驶",
    "deducting_reason": "变道未开启转向灯或未观察后面情况",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":53,
    "item_content": "模拟高速公路行驶",
    "deducting_reason": "驶入高速公路时，未提速至规定车速",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":54,
    "item_content": "模拟高速公路行驶",
    "deducting_reason": "驶出高速公路时，未按照出口预告标志提前调整车速和车道",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":55,
    "item_content": "模拟连续急弯山区路行驶",
    "deducting_reason": "进入弯道前未减速至通过弯道所需的速度",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":56,
    "item_content": "模拟连续急弯山区路行驶",
    "deducting_reason": "弯道内占用对方车道",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":57,
    "item_content": "模拟连续急弯山区路行驶",
    "deducting_reason": "转弯过程中方向控制不稳,车轮轧弯道中心线或道路边缘线",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":58,
    "item_content": "模拟连续急弯山区路行驶",
    "deducting_reason": "进入弯道前未鸣喇叭",
    "score_deducting":10,
    "required_precision":""
  },
  {
    "item_id":59,
    "item_content": "模拟隧道行驶",
    "deducting_reason": "驶抵隧道时未减速或未开启前照灯",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":60,
    "item_content": "模拟隧道行驶",
    "deducting_reason": "驶入隧道后不按规定车道行驶、变道",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":61,
    "item_content": "模拟隧道行驶",
    "deducting_reason": "驶抵隧道出(入)口时未鸣喇叭",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":62,
    "item_content": "模拟隧道行驶",
    "deducting_reason": "驶出隧道后未关闭前照灯",
    "score_deducting":5,
    "required_precision":""
  },
  {
    "item_id":63,
    "item_content": "模拟雨(雾)天行驶",
    "deducting_reason": "雨天未开启或正确使用雨刮器",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":64,
    "item_content": "模拟雨(雾)天行驶",
    "deducting_reason": "雾天未开启示廓灯、雾灯、前照灯、危险报警闪光灯",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":65,
    "item_content": "模拟湿滑路行驶",
    "deducting_reason": "未能使用低速挡(一挡或二挡)平稳通过",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":66,
    "item_content": "模拟湿滑路行驶",
    "deducting_reason": "进入湿滑路面未减速",
    "score_deducting":100,
    "required_precision":""
  },
  {
    "item_id":67,
    "item_content": "模拟湿滑路行驶",
    "deducting_reason": "通过时急加速、急刹车",
    "score_deducting":100,
    "required_precision":""
  }
]

 app/src/main/java/safeluck/drive/evaluation/DB/Constant.java

@@ -8,4 +8,5 @@
 */
public class Constant {
    public static final String CRITERIAFOR_I_JSON = "criteria_I.json";
    public static final String CRITERIAFOR_II_JSON = "criteria_II.json";
}

 app/src/main/java/safeluck/drive/evaluation/DB/WorkRoomDataBase.java

@@ -15,8 +15,11 @@
import java.util.concurrent.Executors;

import safeluck.drive.evaluation.DB.criterias.CriteriaForI;
import safeluck.drive.evaluation.DB.criterias.CriteriaForII;
import safeluck.drive.evaluation.DB.criterias.CriteriaForIIWorker;
import safeluck.drive.evaluation.DB.criterias.CriteriaForIWorker;
import safeluck.drive.evaluation.DB.criterias.CriteriaIDao;
import safeluck.drive.evaluation.DB.criterias.CriteriaIIDao;
import safeluck.drive.evaluation.DB.failitems.FailProjDao;
import safeluck.drive.evaluation.DB.failitems.FailedProj;
import safeluck.drive.evaluation.DB.failitems.FailedProjWorker;
@@ -28,11 +31,15 @@
 * 邮箱：632393724@qq.com
 * All Rights Saved! Chongqing AnYun Tech co. LTD
 */
@Database(entities = {Student.class, CriteriaForI.class, FailedProj.class},version = 1,exportSchema = false)
@Database(entities = {Student.class, CriteriaForI.class, FailedProj.class, CriteriaForII.class},version = 1,exportSchema = false)
public abstract class WorkRoomDataBase extends RoomDatabase {
    private static final String TAG = "WorkRoomDataBase";
    public abstract StudentDao getstudentDao();

    //科目二 I类考场评判表
    public abstract CriteriaIDao getCriteriaIDao();
    //科目二 II类考场评判表
    public abstract CriteriaIIDao getCriteriaIIDao();
    public abstract FailProjDao getFailProjDao();
    private static volatile WorkRoomDataBase workRoomDataBase;

@@ -54,10 +61,12 @@
                                    OneTimeWorkRequest oneTimeWorkRequest = OneTimeWorkRequest.from(SeedDatabaseWorker.class);
                                    OneTimeWorkRequest oneTimeWorkRequest1 = OneTimeWorkRequest.from(CriteriaForIWorker.class);
                                    OneTimeWorkRequest oneTimeWorkRequest2 = OneTimeWorkRequest.from(FailedProjWorker.class);
                                    OneTimeWorkRequest oneTimeWorkRequest3 = OneTimeWorkRequest.from(CriteriaForIIWorker.class);
                                    Log.i(TAG, "onCreate: 创建数据库后建立数据表插入数据");
                                    WorkManager.getInstance(mContext).enqueue(oneTimeWorkRequest);
                                    WorkManager.getInstance(mContext).enqueue(oneTimeWorkRequest1);
                                    WorkManager.getInstance(mContext).enqueue(oneTimeWorkRequest2);
                                    WorkManager.getInstance(mContext).enqueue(oneTimeWorkRequest3);
                                }

                                @Override

 app/src/main/java/safeluck/drive/evaluation/DB/criterias/CriteriaForII.java

@@ -36,4 +36,44 @@

    @ColumnInfo(name = "required_precision")
    private String required_precision;

    public int getItem_id() {
        return item_id;
    }

    public void setItem_id(int item_id) {
        this.item_id = item_id;
    }

    public String getItem_content() {
        return item_content;
    }

    public void setItem_content(String item_content) {
        this.item_content = item_content;
    }

    public String getDeducting_reason() {
        return deducting_reason;
    }

    public void setDeducting_reason(String deducting_reason) {
        this.deducting_reason = deducting_reason;
    }

    public int getScore_deducting() {
        return score_deducting;
    }

    public void setScore_deducting(int score_deducting) {
        this.score_deducting = score_deducting;
    }

    public String getRequired_precision() {
        return required_precision;
    }

    public void setRequired_precision(String required_precision) {
        this.required_precision = required_precision;
    }
}

 app/src/main/java/safeluck/drive/evaluation/DB/criterias/CriteriaForIIWorker.java

New file
@@ -0,0 +1,59 @@
package safeluck.drive.evaluation.DB.criterias;

import android.content.Context;

import androidx.annotation.NonNull;
import androidx.work.Worker;
import androidx.work.WorkerParameters;

import com.anyun.exam.lib.MyLog;
import com.google.gson.Gson;
import com.google.gson.reflect.TypeToken;
import com.google.gson.stream.JsonReader;

import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.lang.reflect.Type;
import java.util.List;

import safeluck.drive.evaluation.DB.Constant;
import safeluck.drive.evaluation.DB.WorkRoomDataBase;

/**
 * MyApplication2
 * Created by lzw on 2019/11/26. 11:59:25
 * 邮箱：632393724@qq.com
 * All Rights Saved! Chongqing AnYun Tech co. LTD
 */
public class CriteriaForIIWorker extends Worker {

    private static final String TAG = "CriteriaForIWorker";

    public CriteriaForIIWorker(@NonNull Context context, @NonNull WorkerParameters workerParams) {
        super(context, workerParams);
    }

    @NonNull
    @Override
    public Result doWork() {
        InputStream inputStream = null;
        try {
            inputStream = getApplicationContext().getAssets()
                    .open(Constant.CRITERIAFOR_II_JSON);
            InputStreamReader inputStreamReader = new InputStreamReader(inputStream);
            JsonReader jsonReader = new JsonReader(inputStreamReader);
            Gson gson = new Gson();
            Type type = new TypeToken<List<CriteriaForII>>(){}.getType();

            List<CriteriaForII> criteriaForIIS = gson.fromJson(jsonReader,type);
            MyLog.i(TAG,"插入科目二，II类考场评判表");
            WorkRoomDataBase.getWorkRoomDataBase(getApplicationContext()).getCriteriaIIDao().insertAllCriteriaII(criteriaForIIS);
            return Result.success();
        } catch (IOException e) {
            e.printStackTrace();
            return Result.failure();
        }

    }
}

 app/src/main/java/safeluck/drive/evaluation/DB/criterias/CriteriaIIDao.java

New file
@@ -0,0 +1,28 @@
package safeluck.drive.evaluation.DB.criterias;

import androidx.lifecycle.LiveData;
import androidx.room.Dao;
import androidx.room.Insert;
import androidx.room.OnConflictStrategy;
import androidx.room.Query;

import java.util.List;


/**
 * MyApplication2
 * Created by lzw on 2019/11/26. 11:12:18
 * 邮箱：632393724@qq.com
 * All Rights Saved! Chongqing AnYun Tech co. LTD
 */
@Dao
public interface CriteriaIIDao {
    @Insert(onConflict = OnConflictStrategy.IGNORE)
    void insertCriteriaII(CriteriaForII criteriaForII);

    @Insert(onConflict = OnConflictStrategy.REPLACE)
    void insertAllCriteriaII(List<CriteriaForII> criteriaForII);

    @Query( "SELECT * FROM criteria_two WHERE item_id =:item_id")
    LiveData<CriteriaForII > queryItemForCriteriaII(int item_id);
}